Zhiyun Crane Plus Firmware Upgrade Tutorial

Zhiyun Crane Firmware Update Tutorials

Put Crane on a flat platform. Update operation: 1. Open the ZhiyunGimbalTools in the folder downloaded. Click twice to open it. Start ZhiyunGimbalTools, open the window, product name will be automatically recognized as Crane. Choose firmware update. Choose downloaded Crane Firmware en V1.50 for browse. Open the 'zhiyun gimabl tools' application, from your computer - connect your usb cable to the side of your followfocus-servo, toggle the switch to upgrade, 'open' your device, browse/drag=drop your firmware update to the 'path' under firmware update tab and clikc 'upgrade at.

Zhiyun Crane Plus Firmware Upgrade Tutorial

Firmware download:

1. Enter Zhiyun official website: www.zhiyun-tech.com

2. Choose Download among Support tab, select tools according to your PC type. Zhiyun has provided Apple’s MAC system driver and windows driver for downloading.

3. Download zhiyun usb driver (mac osx), tools (mac osx), and firmware for Crane.

4. Before installation, choose system preferences, security&privacy, click unlock button, choose anywhere in tab of allowing apps downloaded from these places, make sure to allow from anywhere.

Zhiyun crane plus firmware upgrade tutorial windows

5. Unzip files downloaded just now, to get three files. Install SiLabsUSBDriverDisk, finish installation according to prompts.

Crane preparation before update:

1. Connect the cable to the usb port of Crane and computer.

2. Press the power button to start Crane. After it starts normally, press the joystick for three seconds to get Crane into standby mode. Put Crane on a flat platform.

Update operation:

1. Open the ZhiyunGimbalTools in the folder downloaded. Click twice to open it.